TOTAL QUALITY MANAGEMENT

TOTAL QUALITY MANAGEMENT

As you know that the ADITYA STEEL INDUSTRIES is quality-oriented. So, we have complete quality equipment in our premises and we have well qualified experienced team of engineers. They check each tube and pipe minutely.

Quality tests are as under:

FLARING TEST

The flaring test serves to establish the forming behavior of tubes or pipes which is expanded to a specific degree. This flaring test is carried out in conformity with the code requirements. The specimen to be tested is expanded in a press to the degree specified. Defects that occur as a result of this process are not permissible.

adityasteels-quality-img1
adityasteels-quality-img2

HARDNESS TEST

Samples from each lot are tested to ensure that the hardness of the tube is within permissible limits.

THE TENSILE TEST

The tensile test specimen serves to determine the strength and ductility characteristics i.e. yield strength, tensile strength, and elongation. Tensile tests are normally carried out at room temperature according to DIN, ASTM, BS standards, etc.

adityasteels-quality-img3
adityasteels-quality-img4

EDDY CURRENT TEST

This test used to detect hidden flaws, inhomogeneities, cracks, etc. using the test procedure described in ASTM E-426.

HYDROSTATIC TEST

All tubes and pipes produced at Aditya Steel Industries are compulsorily subject to 100% hydro testing. Hydrostatic testing can be carried out at pressure up to 450 kg/cm sq. The test pressure is achieved using high-pressure triple plunger pumps.

adityasteels-quality-img5

Visual Inspection– All tubes and pipes are subject to 100% visual inspection by highly experienced supervisors.
We don’t only check the quality, we produce it.

Want to know more about Our Company?

Curious what else we do?